AAton XTRprod User's Guide Page 43

  • Download
  • Add to my manuals
  • Print
  • Page
    / 56
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 42
35mm 4-Perf camera, working with the software version number
6.00.
2.11 LED INDICATORS
The XTRprod utilizes LED indicators in three locations to convey
information: in the viewfinder and on both left and right outsides of the
camera body.
2.11.1 Position and Meaning of the Diodes
• Two yellow diodes, placed on both right and left sides of the
camera body indicate that the camera is either on Test or on Run
mode.
• Two red diodes, placed on both right and left side of the camera
body, and a third one, visible from the view finder, display a special
warning.
• One yellow diode, located to the right of the Jog wheel and called
the timecode diode, flashes each second if the timecode has been
initialized in the camrea.
2.11.2 Camera Test Indicator
Yellow diode is on.
● ❍ ● ❍ ● Red diode is blinking fast.
2.11.3 Camera Run Indicator
Yellow diode is on.
Red diode is off.
2.11.4 Low Battery Indicator
Yellow diode is on.
● ❍ ❍ ● ❍ ❍ ● Red diode is flashing slowly.
The LCD control panel displays Lo Batt.
43
THE CAMERA BODY
Displaying a 5 Digit
Speed
If the XTRprod is set to a
variable (5-digit) speed, the
control panel will only display
that speed to the .01 digit.
Keep in mind, the display will
not rounf off the speed, but
simply leave off the last digit.
For example, if the 5 digit
speed of 23.976 is entered, the
control panel will display
23.97, not 23.98.
Remember…
Variable Speed for Phasing
Keep in mind, the speed phase
function of the control panel
will only operate when a
variable speed is initially
selected.
When shooting 29.97, for
example, be sure to choose the
specific 29.970 instead of the
preset 29.97 if you plan to
incorporate the phase function
for that particular shot.
USER 16 US.sept 6/12/97 17:29 Page 43
Page view 42
1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 55 56

Comments to this Manuals

No comments