AAton XTRprod User's Guide download pdf (Page 32)

carrying handle of the camera as you guide the mag in place. Push

ﬁrmly and evenly until you feel and hear the magazine snap into

place.

6.2 Removing the Magazine

To remove the magazine, situate yourself as before, towards the rear

motor side of the camera. Grasp the magazine anywhere which is

comfortable at its rear. Place your hand above the motor of the

camera and push the mag release lever towards the front of the

camera with your thumb. Pull the magazine straight off the camera

with your right hand.

2.7 POWER

XTRprod body requires only 12 volts for all aspects of operation.

One standard Aaton on-board (12V 1.7 ah rechargeable nicad) will

power the camera, CCD and any accessories which are connected to

the body’s accessory inputs (such as zoom controls, speed controls

etc.) through a standard 4 pin XLR connector. One 1.7 ah on-board

battery will run 7-8 magazines on the XTRprod, without CCD and

USER 16 US.sept 6/12/97 17:28 Page 32

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 55 56

No comments

AAton XTRprod User's Guide Page 32